The Ethernet Interface; Network Active; Ftp Active; Ftp User - Vidicode Octo Manual

10 The Ethernet interface

The Call Recorder has mature Ethernet capabilities. When the network
configurations have been made the Call Recorder can be accessed over
the network using the archive software. Messages can be downloaded
and played with this software. See the following section for instructions.
10.1
Press the
•
Network settings menu.
When you enter the Network settings menu the display will show:

Network active:

NEXT
Press CHANGE CHANGE to enable or disable the network.
CHANGE CHANGE
•
Press NEXT NEXT to save and move on to the next menu item. NEXT NEXT
•
10.2
FTP stands for File Transfer Protocol. This is the protocol used by the Call
Recorder to transfer files over the network. This is a widely used
protocol that is also being used for the Internet.

FTP active:

NEXT
Press CHANGE CHANGE to enable FTP.
CHANGE CHANGE
•
Press NEXT NEXT to save and move on to the next menu item.
NEXT NEXT
•
10.3
The FTP user is the user name of the Call Recorder. It is used by the
Archive software to log on to the Call Recorder.
Manual Call Recorder Octo | Quarto © Vidicode 2010
Network active
and
FTP active

FTP user

LAN function key to enter the
No
CHANGE
No
CHANGE
STOP
STOP
63