Table of Contents
Advertisement
11 The Ethernet interface
The Call Recorder has mature Ethernet capabilities. When the network
configurations have been made the Call Recorder can be accessed over the
network using the Archive software. Messages can be downloaded and
played with this software. See the following section for instructions.
11.1 Network active
•
Press the
When you enter the Network settings menu the display will show:
Network active:
NEXT
Enabling the Network
Press CHANGE to enable or disable the network.
•
• Press NEXT to save and move on to the next menu item.
11.2 FTP active
FTP stands for File Transfer Protocol. This is the protocol used by the Call
Recorder to communicate over the network. This is a widely used protocol
that is also being used for the Internet.
FTP active:
NEXT
Enabling FTP
•
Press CHANGE to enable FTP.
• Press NEXT to save and move on to the next menu item.
11.3 FTP user
The Ftp user is the user name of the Call Recorder. It is used by the Archive
software to log on to the Call Recorder.
function key to enter the network settings.
CHANGE
STOP
CHANGE
STOP
Call Recorder manual © Vidicode 2005
No
No
57
Advertisement
Table of Contents
Need help?
Do you have a question about the Octo and is the answer not in the manual?
Questions and answers