Recorder Settings; Opening The Recorder Settings Menu; Speaker - Vidicode Octo Manual

4 Recorder settings

Recorder settings of the Call Recorder consist of the default settings of the
Speaker and Volume, setting of the Clock, optionally protect the Call
Recorder with a password and setting the Language. Finally the Reset all
values operation is described. The Reset all Values operation is used to
return to the original factory settings of the Call Recorder. All general
settings are made in the Recorder settings menu.

4.1 Opening the Recorder settings menu

Press the
The Recorder settings menu starts with the configuration of the eight
independent telephone lines. The configuration of the telephone lines is
skipped here and described in Chapter 5. After the Line settings the first item
in the settings to appear is the Speaker setting.

4.2 Speaker

The Speaker setting controls the standard speaker status when the monitor
function is started. I.e. if a specific line is monitored and the line becomes
active the call can be heard directly through the speaker.
• Press the
NEXT until the following display appears:
Speaker: On
NEXT
The Speaker setting
• Press CHANGE to disable or enable the Speaker.
to enter the Recorder settings menu.
function key and scroll through the menu by pressing
CHANGE STOP
Call Recorder manual © Vidicode 2005
19