Recorder Settings; Opening The Recorder Settings Menu; Line Interface; Start Method - Vidicode SD2750 Manual

4 Recorder Settings

Recorder settings of the Call Recorder Single Digital consist of the
following configuration items: Interface, Start method, Protocol,
Notification, Numberlist, Compression, CryptoCard, Password, setting of
the Clock, LCD contrast, setting the Language and resetting to Factory
setting.
4.1

Opening the Recorder settings menu

Press the
•
4.2

Line interface

The first item in the settings to appear is the line interface setting.
In most cases the interface must be set to 2-wire. Only in the case of
ISDN and the Philips D325-4 line, the interface must be set to 4-wire.
Interface: 2-wire
NEXT
Press CHANGE CHANGE to switch from 2-wire to 4-wire.
CHANGE CHANGE
•
Press NEXT NEXT or or or or the
NEXT NEXT
•
the settings menu.
4.3

Start method

The start method defines the way the recordings are started and
stopped.
Start method: Protocol
NEXT
There are 4 start methods:
22 Call Recorder Single Digital manual ©Vidicode 2011-2014
key to enter the recorder settings menu.
CHANGE
and recorder keys to step through
CHANGE
STOP
STOP