Mitsubishi Electric RD77GF8 User Manual page 88

Transient transmission program
For a transient transmission program, configure an interlock with the following module labels.
• "Baton pass status of own station" (SB0047)
• "Baton pass status of each station" (SW00A0 to SW00A7)
Program example
Interlock example
Classification
Module label
(5) Module FB for the station No.1
Program using safety communication function
For a program using safety communication function, configure an interlock with the safety special register described below.
(For the 1st master/local module)
• "Safety refresh communication status of each safety connection (1st module)" (SA\SD1008 to SA\SD1015)
For a communication example using the safety communication function, refer to the following.
(Page 87 Communication Example of Safety Communication Function)
3 PROGRAMMING
86
3.1 Precautions for Programming
Label name
RD77GF_1.stGF11.bSts_BatonPassError
RD77GF_1.stGF11.bnSts_BatonPassError_Station[1]
Description
Baton pass status of own station
Baton pass status of each station (station No.1)
Device
SB0047
SW00A0.0