Precautions
• When a relay sending station is set to "Target Station", only an error code appears without an error message. Set a relay
receiving station to "Target Station".
Network No.1
Station
Station
No.0
No.1
Own station
Receiving
(request source)
(relay) station
(relay) station
• When a station mounted on top of the same base unit (main base unit and extension base unit) is set to "Target Station",
only an error code appears without an error message. Set a station mounted on the different base unit to "Target Station".
Network No.2
Station
Station
No.2
No.0
Sending
1 FUNCTIONS
1.4 Transient Transmission
1
39