Mitsubishi Electric RD77GF8 User Manual page 144

Communication path determination status
■Communication path determination status (Un\G124480 to Un\G124495)
The determination information on the communication path for each network No. of the destination station is stored.
• 0: Route undetermined
• 1: Route determined
Address b15
Un\G124480 16

Un\G124494 Empty
Un\G124495 Empty
The Nos. in the table indicate network Nos.
PORT2 line error occurrence rate (max.)
The receive frame error occurrence rate (maximum value) on the PORT2 side is stored.
Note that no value is stored in the area for the station No. of the own station.
■PORT2 line error occurrence rate (max.) (station No.1) (Un\G130224)
The receive frame error occurrence rate (maximum value) of station No.1 is stored.
■PORT2 line error occurrence rate (max.) (station No.2 to 120) (Un\G130225 to Un\G130343)
The receive frame error occurrence rate (maximum value) of station No.2 to 120 is stored.
■PORT2 line error occurrence rate (max.) (station No.0) (Un\G130344)
The receive frame error occurrence rate (maximum value) of station No.0 is stored.
PORT2 line error occurrence rate (present)
The receive frame error occurrence rate (present value) on the PORT2 side is stored.
Note that no value is stored in the area for the station No. of the own station.
■PORT2 line error occurrence rate (present) (station No.1) (Un\G130352)
The receive frame error occurrence rate (present value) of station No.1 is stored.
■PORT2 line error occurrence rate (present) (station No.2 to 120) (Un\G130353 to Un\G130471)
The receive frame error occurrence rate (present value) of station No.2 to 120 is stored.
■PORT2 line error occurrence rate (present) (station No.0) (Un\G130472)
The receive frame error occurrence rate (present value) of station No.0 is stored.
APPX
142
Appendix 2 Buffer Memory
b14 b13 b12 b11
15 14 13 12
239 238 237 236
b10 b9 b8 b7
11 10 9 8
235 234 233 232
b6 b5 b4 b3
7 6 5 4
231 230 229 228
b2 b1 b0
3 2 1
227 226 225