Mitsubishi Electric RD77GF8 User Manual page 22

Coexistence of local stations and the other slave stations (other than local stations)
The data of all slave stations are also stored in the local stations in the same way as the master station.
CPU module
Device
Device
*1 There is no RX or RY depending on the slave module.
Setting method
The link devices can be assigned in "Network Configuration Settings" under "Basic Settings". (Page 67 Network
Configuration Settings)
The link refresh is assigned in "Refresh Settings" under "Basic Settings". (Page 70 Refresh Settings)
1 FUNCTIONS
20
1.3 Cyclic Transmission
Station No.0 Station No.1
Master
Slave station
station
(Simple
Motion
module)
RX, RWr RX, RWr
Station Range of the
station No.1
No.1
sending data
Station
No.2
Station
No.3
RY, RWw RY, RWw
Range of the
sending data to
the station No.1
Range of the
sending data to
the station No.2
Range of the
sending data to
the station No.3
Station No.2
Slave station
*1
*1
RX, RWr
Range of the
station No.2
sending data
*1
Station
No.1
RY, RWw
Station
No.2
Area where data is sent to
other stations
Station No.3
Local station
RX, RWr
Station
No.1
Station
No.2
Station
No.3
RY, RWw
Station
No.1
*1
Station
No.2
Range of the
station No.3
sending data