Show Controllers Switch - Cisco Catalyst 3550 Command Reference Manual

show controllers switch

show controllers switch
Use the show controllers switch privileged EXEC command to display the settings of the
resource-allocation priority or the wirespeed-store feature.
Syntax Description resource-allocation priority
wirespeed-store
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers switch resource-allocation priority command.
Switch# show controllers resource-allocation priority
Switch Priority Resource Allocation is enabled.
Related Commands Command
switchcore
priority
switchcore
Catalyst 3550 Multilayer Switch Command Reference
2-248
show controllers switch {resource-allocation priority | wirespeed-store} [ | {begin | exclude |
include} expression]
Modification
This command was first introduced.
resource-allocation
wirespeed-store
Display the resource-allocation priority setting.
Display the wirespeed setting.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Description
Reserves switch resources for high-priority traffic or gives buffer
storage more priority than packet retrieval.
Chapter 2 Cisco IOS Commands
78-11195-09