SpectraLink IP-DECT 200 Installation And Configuration Manual page 95

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Primary Server (Optional)
Secondary Server (Optional)
General Configuration - NTP (Network Time Protocol)
Server (Optional)
Time zone (Optional)
Posix timezone string (Optional) Customized time zone setting. The string must be in
General Configuration - UPnP
Enabled (Optional)
Broadcast announcements
(Optional)
General Configuration - Remote syslog
Host (Optional)
Port
Facility
14215700-IG, Edition 8.0
April 2018, Original document
Setting
Enter the IP address of the Primary DNS server.
Enter the IP address of the Secondary DNS server.
Enter the IP address of the NTP server from which the
system will obtain the current time.
Select the wanted time zone. The time zones include day-
light saving times.
POSIX time zone format.
Enabled by default. If enabled, the device is UPnP dis-
coverable.
UPnP is an acronym for Universal Plug and Play. If the
IP address of the device is unknown (e.g. forgotten or
DHCP-assigned), UPnP can be used to easily identify
the IP address of the device.
Note: If My Network Places in Windows is setup to
show icons for networked UPnP devices, every Spec-
tralink IP-DECT Server, Media resource and Base sta-
tion will be present in My Network Places.
Specifies if UPnP announcements are broadcasted.
If enabled, the device broadcasts announcements auto-
matically.
Enter the host or IP address of the remote syslog server.
If specified, messages will be sent to the server.
Server port used for remote syslog.
Default value: 514
Remote syslog facilities used for log messages.
Default value: Local 0
Refer to RFC5424.
95