Configuration - Security - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Configuration - Security

Field
Security Configuration - Administrator Authentication
Current password
New username
New password (Optional)
New password again
(Optional)
Strict password requirements
(Optional)
Password expiration (Optional) Select when you want the password to expire.
Security Configuration - Data protection
Allow unencrypted HTTP
(Optional)
Allow remote logging
(Optional)
14215700-IG, Edition 8.0
April 2018, Original document
Setting
Enter the current password.
Enter a new username.
Enter a new password.
Enter the new password again to confirm.
If enabling strict password requirements, the device can be con-
figured to enforce certain security rules and naming con-
ventions. For more information, see
page 223.
Note: Once enabled, this setting can only be disabled by a fact-
ory reset (Configuration > Factory Reset) that will remove all
configuration and user data.
Possible values: Never, 30 days or 90 days.
Default value: Never
Note: Once enabled, this setting can only be disabled by a fact-
ory reset (Configuration > Factory Reset) that will remove all
configuration and user data.
HTTPS is forced by default.
If enabled, HTTP support is supported instead of HTTPS.
Note: Enabling unencrypted HTTP can cause passwords and
other sensitive data to be transmitted in clear text on the net-
work.
If enabled, remote logging is allowed.
Remote logging allows for Spectralink debug tools to extract
debug information from the unit.
"Parameter Overview" on
236