SpectraLink IP-DECT 200 Installation And Configuration Manual page 104

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Tone duration(msec)
SIP Configuration - Message waiting indication
Enable indication (Optional)
Enable subscription (Optional)
Subscription expire(sec)
SIP Configuration - Media
Packet duration(msec)
Media type of service (TOS/Diff-
serv)
Media 802.1p Class-of-Service
Port range start
Codec priority
SDP answer with preferred
codec (Optional)
SDP answer with a single codec
(Optional)
Ignore SDP version (Optional)
14215700-IG, Edition 8.0
April 2018, Original document
Setting
Enter the time length of the tone in milliseconds.
Default value: 270 msec
If enabled, MWI is displayed in the handset.
If enabled, you can subscribe to MWI indications from the
SIP proxy.
Enter the number of seconds before MWI subscription
will be renewed.
Default value: 3600 sec
Packet duration for transmitted RTP Packets.
Possible values: 10, 20 or 40 msec.
TOS/Diffserv used for RTP (Media) signaling entered in
decimal.
Default value: 184 (EF - Expedited Forwarding)
This is the 802.1p PCP and must be between 0 and 7.
The setting requires VLAN tagging.
Default value: 5
Port range start for local RTP ports.
Default value: 58000
Define the priorities of codecs.
Possible values: PCMU, PCMA, G.726 or G.729.
Specifies if the media handling should ignore the remote
SDP offer codec priorities.
Specifies if the media handling should provide only a
single codec in SDP answers.
Ignore the version of the SDP received from remote end-
points.
104