SpectraLink IP-DECT 200 Installation And Configuration Manual page 239

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Max forwards
Client transaction timeout(msec)
SIP type of service (TOS/Diffserv)
SIP 802.1p Class-of-Service
GRUU (Optional)
Use SIPS URI (Optional)
TLS allow insecure (Optional)
TCP ephemeral port in contact
address (Optional)
14215700-IG, Edition 8.0
April 2018, Original document
Setting
The maximum number of proxies outgoing messages are
allowed to traverse.
Default value: 70
Client transaction time-out. This controls timer B and F as
specified in RFC3261. Increase this to eliminate time out
errors or decrease it to reduce fail over time.
Default value: 16000 msec
TOS/Diffserv used for SIP signaling. Entered in decimal.
Default value: 96 (AF - Assured Forwarding)
This is the 802.1p PCP and must be between 0 and 7. The
setting requires VLAN tagging.
Default value: 3
If enabled, Globally Routable User Agent URIs are sup-
ported.
Default value: Enabled
Normally, SIP communication on a TLS connection uses the
SIPS: URI scheme.
Disabling this option causes the Wireless Server to use the
SIP: URI scheme with a transport=tls parameter for TLS con-
nections.
Default value: Disabled
By default, UDP and TCP transports are disabled when TLS
transport is the default. If this setting is enabled, UDP and
TCP are allowed as fallback if TLS fails.
Default value: Disabled
If enabled, the TCP ephemeral port (the local TCP port of the
outgoing connection) to the contact header, used in outgoing
SIP messages, is added.
239