Configuration Steps Overview - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Configuration Steps Overview

Below is an overview of the steps to follow in order to configure the Spectralink IP-DECT Server solu-
tion after having installed all system components and completed all pre-configuration tasks.
After following these steps, you will be able to make calls between handsets:
1. Power up the Spectralink IP-DECT Server and Spectralink DECT Media Resource (if used).
For more information, see
page 49,"Installing the Spectralink IP-DECT Server 400" on page 54
tralink IP-DECT Server 6500 and Spectralink DECT Media Resource" on page 55
2. Change the IP address of the Spectralink IP-DECT Server.
For more information, see
page 93.
3. Power up the Spectralink IP-DECT Base Station.
For more information, see
Note:
Not relevant to the Spectralink IP-DECT Server 200.
4. Change the IP address of the Spectralink IP-DECT Base Station.
For more information, see
Note:
Not relevant to the Spectralink IP-DECT Server 200.
5. Configure the Spectralink IP-DECT Base Station with the address of the Spectralink IP-
DECT Server.
For more information, see
and Spectralink DECT Media Resource" on
Note:
Not relevant to the Spectralink IP-DECT Server 200.
6. SIP registration - configure the settings for the IP-PBX (Configuration > SIP). Remember to
reboot the server.
For more information, see
7. Register/create users and enter values for user name, authentication user and authentication
password (depending on PBX type).
For more information, see
8. Subscribe handset.
For more information, see
on page 139.
14215700-IG, Edition 8.0
April 2018, Original document
"Installing the Spectralink IP-DECT Server 200" on
"To Configure a Static IP Address and Other Network Settings" on
"Installing the Spectralink IP-DECT Base Station" on
"To Configure a Dynamic IP address" on
"Assigning Server Address to Spectralink IP-DECT Base Station
page 123.
"Configuring SIP and IP-PBX Settings" on
"Handset Management" on
"Registering Users and Subscribing Spectralink DECT Handsets"
and "Installing the Spec-
page 92.
page 101.
page 143.
.
page 62.
82