Registering Users And Subscribing Spectralink Dect Hand- Sets; Registering A User; To Register/Create A New User - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Registering Users and Subscribing Spec-
tralink DECT Handsets
You must register a user and subscribe a handset before you can use it.
When registering users, you enter information about each user's settings (such as; IPEI, user-
l
name (handset serial number), access code etc.) in the system database.
For more information about the handsets serial number, see
Handset" on page 48.
When subscribing handset, you subscribe a handset to a registered user with a matching
l
IPEI.
Note:
If the user is not registered in the system database, subscription of the handset is
not possible.

Registering a User

To register users, you use the web based Administration Page of the server.

To Register/Create a New User

1. Click Users, and then click List Users.
2. Click New to create a new user.
3. On the User page, enter the following data:
Field
User - DECT device
Model
Software part number
Firmware
14215700-IG, Edition 8.0
April 2018, Original document
Setting
After registration of user and subscription of handset, this
field will contain information about the handset model.
E.g. Spectralink7742
After registration of user and subscription of handset, this
field will contain information about the software part-
number.
E.g. 14225100
After registration of user and subscription of handset, this
field will contain information about the firmware version.
E.g. PCSJA.
"Identifying IPEI on Spectralink
139