Deleting Licenses - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Deleting Licenses

1. Click Administration, and then click License.
2. On the Licenses page, under Loaded licenses, click Delete, to delete the relevant license.
Note:
If you by mistake delete a license or perform a factory reset of the system (which will
delete all loaded licenses), it is possible to retrieve the license(s) again by entering the
ARI code of the Spectralink IP-DECT Server in the Spectralink License Key Generator
on Spectralink Corporation's support portal: http://support.spectralink.com/keycode.
In the ARI (DECT) / Serial number (Wi-Fi) field, enter the ARI, and click
l
Submit.
Copy the license(s) into the web based Administration Page (Administration >
l
License > Licenses > Load license) and click Load.
If the license does not appear when entering the ARI of the system, contact
nicalsupport@spectralink.com.
For information about loading a license, see
14215700-IG, Edition 8.0
April 2018, Original document
"Loading Licenses" on
Tech-
page 43.
172