Configuration - Provisioning - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Redundancy Configuration - Settings
Failover time(sec)

Configuration - Provisioning

Field
Provisioning Configuration - Server
Method
14215700-IG, Edition 8.0
April 2018, Original document
Setting
Enter value for failover time.
Failure time is the time in seconds from the Spectralink IP-
DECT Server detects a failure, until it initiates a failover oper-
ation and cause the other peer to take over.
Default value: 15 sec
For more information about failure time, see
ditions" on page 192.
Setting
The Spectralink IP-DECT/DECT Server must know the pro-
tocol and address of server containing the firmware and con-
figuration.
The Spectralink IP-DECT/DECT Server can use the fol-
lowing methods to obtain the provisioning server URL:
Disabled (The Spectralink IP-DECT/DECT Server
l
will not use provisioning)
Static (The administrator must manually specify the
l
URL of the provisioning server)
DHCP (Option 66)
l
Select the relevant method for obtaining the URL of the pro-
visioning server.
Default value: DHCP
"Failover time con-
244