To Search Handset/User Information; To Disable/Enable User; To Delete User; To Re-Register User - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

To Search Handset/User Information

You can search for a registered handset/user in the system through the web based Administration
Page.
1. Click Users, and then click List Users.
2. In the Search field, enter relevant search string.
The search results are shown in the list.

To Disable/Enable User

As default a user is enabled. You can disable a user on the server and prevent this user from making
calls from the handset.
1. Click Users, and then click List Users.
2. On the User List page, select the relevant user(s) from the list.
3. Click either Enable or Disable.

To Delete User

1. Click Users, and then click List Users.
2. On the User List page, select the relevant user(s) from the list.
3. Click Delete.
4. Click OK to confirm.

To Re-register User

1. Click Users, and then click List Users.
2. On the User List page, select the relevant user(s) from the list.
3. Click Re-register.

To Un-subscribe User

You can unsubscribe a handset from the system.
1. Click Users, and then click List Users.
2. On the User List page, select the relevant user(s) from the list.
3. Click Un-subscribe.
4. Click OK to confirm.
14215700-IG, Edition 8.0
April 2018, Original document
146