Administration - Backup - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Filter (Optional)
Attributes
Number attributes (Optional)
Attributes names (Optional)
Replace prefixes (Optional)
Load interval

Administration - Backup

Field
System Backup - Backup
Full system backup
System Backup - Restore
Full system restore
14215700-IG, Edition 8.0
April 2018, Original document
Setting
Enter the filter used for the LDAP query. The (objectClass-
s=person) filter can be used successfully in most cases.
Enter the LDAP attributes you want to query the LDAP for, sep-
arated by a comma.
E.g. displayName,telephoneNumber, mobile.
Enter LDAP attributes that will be used to dial.
E.g. telephoneNumber,mobile.
Enter the attribute names you want to assign to the attributes
specified above, separated by a comma.
E.g. Name,Phone,Mobile.
Enter the phone number prefixes to replace or strip, separated
by a comma.
E.g.: if the phone number is +45678912345, and that user has
the extension 12345, then you specify "+456789" in the
Replace prefixes field. Or if the phone number is
"+456789123456" and "06789123456" must be dialled, then
specify "+45=0".
Enter the interval in seconds for querying the LDAP server for
updates.
Default value: 3600 sec
Possible values: 60 – 999999 sec
Setting
Click Save. A full system backup is performed and saved.
Click Browse to browse for the relevant backup file, and then
click Restore.
260