SpectraLink IP-DECT Server 400 Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. SpectraLink Manuals
  4. Server
  5. IP-DECT SERVER 400
  6. Installation and configuration manual

SpectraLink IP-DECT Server 400 Installation And Configuration Manual

Hide thumbs Also See for IP-DECT Server 400:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation and Configuration Manual
Spectralink IP-DECT Server 400
Installation and Configuration Guide
14219101 version 3.0
August, 2013

Advertisement

Table of Contents
loading

Related Manuals for SpectraLink IP-DECT Server 400

Summary of Contents for SpectraLink IP-DECT Server 400

  • Page 1 Spectralink IP-DECT Server 400 Installation and Configuration Guide 14219101 version 3.0 August, 2013...
  • Page 2 The drawings and specifications contained herein are the property of Spectralink and shall be neither reproduced in whole or in part without the prior written approval of Spectralink, nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.

  • Page 3: Table Of Contents

    Reset Button ............9 Installing the Spectralink IP-DECT Server 400 ....... . 10 Installing the External Antenna .
  • Page 4 Spectralink IP-DECT Server 400 Installation and Configuration Guide System Management Reading System Information ..........26 Multicell Installation .

  • Page 5: Important Information Before You Begin

    The Spectralink IP-DECT Server 400 is pre-configured to use DHCP. If DHCP is not available, it will fall back to static IP address (192.168.0.1) after one minute. The current IP Address of the Spectralink IP-DECT Server 400 can be discovered using UPnP. 14219101 Version 3.0...

  • Page 6: Acronyms

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Enabling UPnP When the Spectralink wireless devices are set up to DHCP, you can use UPnP to discover the wireless devices. The devices appear under Network and Other Devices as “<device name>-<Serial number> “, for example, Spectralink IP-DECT Server 400-8442621 UPnP needs to be enabled on your PC.You enable it from the control panel (Win7) under “Network...

  • Page 7: Introduction To Spectralink Ip-Dect Server 400

    Chapter 2: Introduction to Spectralink IP-DECT Server 400 In addition to the Spectralink IP-DECT Server 400, a typical configuration includes a number of the following components: Repeaters (optional) • Handsets and accessories • Spectralink IP-DECT Base Station (optional) • The Spectralink IP-DECT Server 400 has radio enabled.

  • Page 8: Overview Of The Spectralink Ip-Dect Server 400 Solution

    Spectralink IP-DECT Base Station The Spectralink IP-DECT Base Station has 12 simultaneous traffic channels (32 Kbit/s). The Spectralink DECT IP-Base Station controls the traffic in the air and works as the link between the Spectralink Handsets and the Spectralink IP-DECT Server 400.

  • Page 9: Requirements

    20% and 80% non-condensing relative humidity • Electrical Requirements The IP-DECT server 400 can be powered in two ways: via PoE by a PoE device or using a power supply. The IP-DECT Server 400 uses the Power over Ethernet standard (PoE 802.af). The maximum consumption is 3.0W (IEEE 803.af Class 1 device).

  • Page 10: Installation Prerequisites

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Installation Prerequisites Before you start the installation, ensure: that network connectivity is available -10/100 Mbit/s Ethernet • that the device is powered up - light in from led. • that a SIP PBX is available •...

  • Page 11: Installing Spectralink Ip-Dect Server 400

    Chapter 3: Installing Spectralink IP-DECT Server 400 Before you install the equipment, ensure that a site planner defines the location of the Spectralink IP-DECT Server 400. Types and Numbers The Spectralink IP-DECT Server 400 contains RF circuitry that complies with the local band standards: ETSI DECT and USA DECT 6.0.

  • Page 12: Appearance And Components

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Appearance and Components The Spectralink IP-DECT Server 400 front cover includes the following: LED indicating the operating status of the unit • Figure 1 Spectralink IP-DECT Server 400 - Front view The Spectralink IP-DECT Server 400 faceplate includes the following:...

  • Page 13: Led Indicators

    Activity Indicator - yellow Activity Reset Button It is possible to restart or reset the Spectralink IP-DECT Server 400 by pressing the Reset button on the faceplate of the Spectralink IP-DECT Server 400. Table 4 Reset Button Description Press button Action Short press (2 to 5 sec.)

  • Page 14: Installing The Spectralink Ip-Dect Server 400

    Mount the Spectralink IP-DECT Server 400 on the wall, using the anchors and screws provided. You can also mount the Spectralink IP-DECT Server 400 upside down. When you place the Spectralink IP-DECT Server 400 on the screws, ensure that the screws do not touch the printed circuit board. Figure 3 Spectralink IP-DECT Server 400 Wall Mounting 14219101 Version 3.0...

  • Page 15: Installing The External Antenna

    You connect the external antenna to the Spectralink IP-DECT Server 400 by removing the brick on the rear side and mounting the cable to the external antenna as shown in the following figure. The external antenna is mounted on the wall in the same way as the Spectralink IP-DECT Server 400.

  • Page 16: Configuring Spectralink Ip-Dect Server 400

    The current IP Address of the Spectralink IP-DECT Server 400 can be discovered using UPnP Powering up the Spectralink IP-DECT Server 400 After installing the Spectralink IP-DECT Server 400 you need to power up the unit using PoE or PSU. The PSU must be ordered separately: part number 84642600.

  • Page 17: Configuring Network Settings

    Main page of the Administration Page for Spectralink IP-DECT Server 400 Configuring Network Settings The Spectralink IP-DECT Server 400 is pre-configured to use DHCP. If DHCP is not available, it falls back to static (192.168.0.1) after one minute. The current IP Address of the Spectralink IP-DECT Server 400 can be discovered using UPnP.
  • Page 18 Set the VLAN identifier to match your VLAN (optional). According to IEEE 802.1Q values between 0 and 4094 are valid. Specify the hostname of the Spectralink IP-DECT Server 400 (optional). Must be DNS resolvable. Specify the network domain and the primary and secondary DNS servers.

  • Page 19: Adm. Page Spectralink Ip-Dect Server 400: Configuration/Security Configuration Page

    Make the preferred changes, and then click Save. • Figure 3 Adm. Page Spectralink IP-DECT Server 400: Configuration/Security Configuration page SIP Configuration On the Configuration/SIP tab, you define general SIP settings, information about authentication, DTMF signalling, message waiting indication and media.
  • Page 20 You can set Codec priority individually, and change the order as desired. Note that some codecs are only offered if a license is loaded on IP-DECT Server 400. SDP settings are also specified here. Note that several advanced settings are not visible unless special licences are loaded on the server.

  • Page 21: User And Handset Registration And Subscription

    To register a handset with an IPEI number, use the web based Administration Page of the Spectralink IP-DECT Server 400. For each user you have to enter a user name from the PBX system and the IPEI number of the handset. If required, you must also enter SIP information and a subscription Access Code (AC).
  • Page 22 To enable Auto Create Users, go to the web based Administration Page under • Configuration/Wireless Server, and then select the Autocreate Users box. When the handset is subscribed to the Spectralink IP-DECT Server 400, the user is created with the IPEI field populated. Note All Auto Create user handsets must be manually enabled by the administrator.

  • Page 23: Registering Via The Administration Page

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Registering Via the Administration Page To register handsets you use the web based Administration Page of the Spectralink IP-DECT Server 400. Click Users and then click User List. Figure 1 Adm. Page Spectralink IP-DECT Server 400: Users/User List page Figure 2 Adm.

  • Page 24: Subscribing Spectralink Handsets

    For more flexibility, perform this operation on the handset. See the handset user guide for more information. For information on how to subscribe the Spectralink Handsets, please refer to the handset user guides at www.spectralink.com. Subscribing Spectralink Handsets...
  • Page 25 ARI Code of the system to which you want to subscribe. You can subscribe Spectralink handsets on up to 15 different systems. Except the Spectralink Butterfly handset, which can be subscribed only on 2 systems.
  • Page 26 Spectralink IP-DECT Server 400 Installation and Configuration Guide Subscribing a Handset to Multiple Systems You can subscribe Spectralink Handsets on up to 15 different systems. Except the Spectralink Butterfly handset, which can be subscribed only on 2 systems. Note To be able to log on to a system, handset subscription must be enabled.

  • Page 27: Searching For Handset/User Information

    Type the beginning of the user, display name or IPEI you want to search for in the text field, and then click Search. Figure 3 Adm. Page Spectralink IP-DECT Server 400: Search for Users/List Users page Changing or Removing User Configurations You can change user configurations, such as the authentication code (AC) or standby text, by using the web based Administration Page.

  • Page 28: Removing Spectralink Handsets From The List (Deregistering)

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Removing Spectralink Handsets from the List (Deregistering) You can deregister handsets from Spectralink IP-DECT Server 400. This is necessary when you have to replace the handset due to loss or breakage. Click Users, and then click User List.

  • Page 29: Adm. Page Spectralink Ip-Dect Server 400Version 3.0: Users/Import/Export Page

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Click Users, and then click Import/Export. Figure 7 Adm. Page Spectralink IP-DECT Server 400Version 3.0: Users/Import/Export page Under Import User Data, click Browse to locate the .CSV file that contains the handset registration data.

  • Page 30: System Management

    • NTP Server; from which IP address the system receives its time information • Time; time information - if a time server is valid • Figure 1 Adm. Page Spectralink IP-DECT Server 400: Status/General page 14219101 Version 3.0 August, 2013...

  • Page 31: Adm. Page Spectralink Ip-Dect Server 400: Status/Logs Page

    Click Export if you want to save the log file in an exportable file (status_savelogs.tar). Note when submitting an error report to spectralink support, an Exported log file is always required.

  • Page 32: Adm Page Spectralink Ip-Dect Server 400: Status/Packet Capture Page

    Custom filter Reading Statistics Under Statistics, it is possible to read statistic information about the Spectralink IP-DECT Server 400, about active calls, abnormal releases in the system and traffic distribution. You get an over all overview of how the system is running.

  • Page 33: Adm. Page Spectralink Ip-Dect Server 400: Statistics/Ws Page

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Wireless Server This page is useful to get information about traffic on the Spectralink IP-DECT Server 400 such as voice call traffic and message call traffic and it provides a summary of subscription and hand over statistics.

  • Page 34: Adm. Page Spectralink Ip-Dect Server 400: Statistics/Abnormal Releases Page

    Adm. Page Spectralink IP-DECT Server 400: Statistics/Traffic Distribution page Making a Back-Up of the Configuration File When saving the configuration data you have an overall overview of the Spectralink IP-DECT Server 400 which is useful in case of problem solving.

  • Page 35: Adm. Page Spectralink Ip-Dect Server 400: Configuration/Backup/Restore Page

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Restoring the Configuration File Click Configuration, and then click Import/Export. Figure 10 Adm. Page Spectralink IP-DECT Server 400: Configuration/Backup/Restore page Click Browse. Select the file in question, and then click Open. Click Load.

  • Page 36: Multicell Installation

    Reboot is required before the firmware update applies. Multicell Installation The Spectralink IP-DECT Server 400 is in its basic edition a single cell system (one built-in base station in the server). Additional IP base stations can be added to the Spectralink IP-DECT Server 400 server to expand the covered area.
  • Page 37 To enable IP-DECT Base Stations for use with the Spectralink IP-DECT Server 400, the P-DECT Base Station needs to know the IP address of the Spectralink IP-DECT Server 400. This can be provisioned by a DHCP server to the IP-DECT Base Stations. See the Provisioning Guide on www.spectralink.com for more information.

  • Page 38: Multicell Components

    Figure 16 Base Station Overview In the example above, there are two bases in the Spectralink IP-DECT Server 400 solution. Base station 1 is Synchronization on base 0 (Zero). Repeaters are not visible in the server, and are add-ons to the system and are not manageable by the system. A repeater is managed directly on the repeater itself using a PC and a repeater programming kit.

  • Page 39: Regulatory Notices

    Chapter 7: Regulatory Notices International Regulatory and Product Information Spectralink IP-DECT Server 400 is electrically identical (including its RF characteristics) to Spectralink DECT BASE K005. This Spectralink product has been marked with the CE mark. This mark indicates compliance with EEC Directives 1999/5/EC.
  • Page 40 1999/5/CE. Íslenska (Icelandic): Hér með lýsir Spectralink Europe ApS yfir því að Spectralink IP-DECT Server 400 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC Latviski [Latvian]: Ar šo Spectralink Europe ApS deklare, ka Spectralink IP-DECT Server 400 atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem.

  • Page 41: Explosive Device Proximity Warning

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Explosive Device Proximity Warning Warning. Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use.
  • Page 42 Spectralink IP-DECT Server 400 Installation and Configuration Guide The WEEE Marking on this equipment indicates that the product must not be disposed of with unsorted waste, but must be collected separately. Appropriate RF safety/installation informatio The product is intended to be installed by authorized personal.

  • Page 43: Important Safety Instructions And Product Information

    Spectralink IP-DECT Server 400 Installation and Configuration Guide Safety WARNING! Only qualified service personnel may install this equipment. The instructions in this manual are intended for use by qualified service personnel only. Only qualified persons should service the system. The installation and service of this hardware is to be performed only by service...
  • Page 44 Spectralink IP-DECT Server 400 Installation and Configuration Guide To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current, or other risks. Incorrect reassemble can cause electrical shock when the appliance is subsequently used.
  • Page 45 Spectralink IP-DECT Server 400 Installation and Configuration Guide RF compliance information The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the y responsible for compliance could void the user’s authority to operate the equipment.
  • Page 46 Spectralink IP-DECT Server 400 Installation and Configuration Guide This warranty is also void if this product is removed from the country in which it was purchased by the original purchaser, if it is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed.

  • Page 47: Open Source Software Notice

    GPLv2 or LGPLv2 from http://support.spectralink.com/SpectralinkService/support/us/support/voice/index.html. Alternatively, Spectralink (Denmark) offers to provide such source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling, upon written request to Spectralink (Denmark) at:...
  • Page 48 Spectralink IP-DECT Server 400 Wall Mounting ........
  • Page 49 Spectralink IP-DECT Server 400 Part Numbers ........

Table of Contents