Status - Logs - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
NTP (Network Time Protocol)

Status - Logs

Field
Message Log
Display filter
14215700-IG, Edition 8.0
April 2018, Original document
OK if the latest communication with the NTP server was suc-
cessful.
From the Display filter list you can select between emer-
gency, critical, error, warning, notice or info depending
on the logs you want to see. Furthermore, select between
Application or Audit to get the wanted log type.
The different types of status are:
emergency (errors causing the system to malfunction
l
for all calls)
critical (events that do not occur under normal oper-
l
ation, cause major malfunction)
error (events that do not occur under normal oper-
l
ation, cause minor malfunction)
warning (events that do not occur under normal oper-
l
ation, may cause malfunction)
notice info (events that occur under normal operation)
l
An Application log is a file of events, logged by the system.
An Audit log is a chronological set of records documenting
the sequence of activities.
It is possible to clear the message log buffer for Application
logs. The Audit log cannot be deleted - except when per-
forming a factory reset.
It is possible to stream an Application log, whereas an
Audit log cannot be streamed.
224