SpectraLink IP-DECT 200 Installation And Configuration Manual page 109

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
Wireless Server Configuration - Media resources (Not relevant to the Spectralink IP-
DECT Server 200/400)
Allow new (Optional)
Add new as active (Optional)
Require encryption (Optional)
Wireless Server Configuration - Base stations (Not relevant to the Spectralink IP-
DECT Server 200.
Allow new (Optional)
Add new as active (Optional)
Require encryption (Optional)
RFP port range start
14215700-IG, Edition 8.0
April 2018, Original document
If enabled, new media resources are allowed to con-
nect to the server.
If enabled, new media resources will become active
when added. Otherwise they must be activated manu-
ally under Administration > Media Resource >
Media Resource page.
If enabled, the connection between the media
resource and the Spectralink IP-DECT Server is
required to be encrypted.
Note: Enabling this, will only allow media resources
with firmware PCS17Fa or newer to connect.
If not enabled, the connection will be encrypted if the
media resource supports encryption.
If enabled, new base stations are allowed to connect
to the server.
If enabled, new base stations will become active when
added. Otherwise, they must be activated manually
under Administration > Base Station > Base Sta-
tion page.
If enabled, the connection between the base station
and the Spectralink IP-DECT Server is required to be
encrypted.
Note: Enabling this, will only allow base stations with
firmware PCS17Fa or newer to connect.
If not enabled, the connection will be encrypted if the
base station supports encryption.
Port range start for RFP local RTP ports.
Default value: 57000
Note: It is possible to change the value in case of con-
flicting ports.
109