SpectraLink IP-DECT 200 Installation And Configuration Manual page 112

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
New password again (Optional)
Enable MSF (Optional)
Enable XML-RPC (Optional)
Internal messaging (Optional)
Wireless Server Configuration - Feature codes
Enable (Optional)
Call forward unconditional - enable
(Optional)
Call forward unconditional - dis-
able (Optional)
Wireless Server Configuration - Languages
Phone Language (Optional)
Wireless Server Configuration - MSF
Enable Long-Press Key0 - Phone-
book (Optional)
Enable Long-Press Key1- Phone-
book (Optional)
14215700-IG, Edition 8.0
April 2018, Original document
Confirm password required to access the application
interface.
If enabled, access to the MSF application interface is
supported.
Default value: Disabled
If enabled, access to the XML-RPC application inter-
face is supported.
Default value: Disabled
If enabled, internal messaging to allow handset-to-
handset messaging without an external application is
suported.
If enabled, feature codes for controlling features from
the handsets can be used.
Enable call forward unconditional by dialing this code
(*21*), including the desired extension.
E.g.: *21*$#
Note: It is possible to change the code *21* on the
Spectralink IP-DECT Server to fit your standard. For
more information, see the relevant documentation
available at http://support.spectralink.com/.
Disable call forward unconditional by dialing this code
(#21#).
Language of system messages displayed in handset.
Select the desired language from the list.
If enabled, allow DECT Server to use this long key
press for phone book.
If enabled, allow DECT Server to use this long key
press for phone book.
112