Administration - Media Resource - Media Resource - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Administration - Media Resource - Media Resource

Field
Media Resource - General
IP address (Read only)
Description (Optional)
Cluster
Disabled (Optional)
14215700-IG, Edition 8.0
April 2018, Original document
Current IP address of the media resource.
Enter a description.
It is recommended to use a description of the physical loc-
ation.
Default value: Default
It is possible to cluster devices that are located at the same
location.
To assign a cluster to the media resource, select the relevant
cluster from the list.
For information about defining clusters, see
Clusters" on page 118.
If enabled, the media resource will be disabled.
Note: If Add new as active is enabled (Configuration >
Wireless Server > Media resources), then this will be
unset by default when adding a new media resource.
"Configuring
255