Updating Firmware - SpectraLink IP-DECT 200 Installation And Configuration Manual

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Updating Firmware

Note:
Contact your distributor for newest firmware.
Spectralink IP-DECT Server, Spectralink IP-DECT Base Station and Spectralink DECT Media
Resource firmware can be updated the following ways:
Using the web based Administration Page of the Spectralink IP-DECT Server.
l
Provisioning. For more information, see Provisioning Guide.
l
The Spectralink DECT Handset firmware can be updated the following ways:
Over the Air (SUOTA - Software Update Over The Air) through the web based Administration
l
Page of the Spectralink IP-DECT Server.
Using the Handset Management Cradle and Handset and Repeater Management Tool.
l
To update the Spectralink DECT Handset using the Handset and Repeater Management
Tool, acquisition of a Handset Management Cradle and download of Handset and Repeater
Management Tool is required. Physical access to each Spectralink DECT Handset to be
updated is also required.
For more information about the Handset Management Cradle and Handset and Repeater
Management Tool, see Handset User Guides and Handset and Repeater Management Tool
User Guide.
Provisioning. For more information, see Provisioning Guide.
l
Note:
Before updating system software, always make a backup of the configuration. For more
information, see
14215700-IG, Edition 8.0
April 2018, Original document
"Making a Back-Up and Restore of System" on the previous page.
152