SpectraLink IP-DECT 200 Installation And Configuration Manual page 205

Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
Field
LAN sync type of service (TOS/Diff-
serv)
(Only visible if license loaded)
Wireless Server Configuration - Handsets (Not relevant to the Spectralink IP-DECT
Server 200.
Handset sharing (Optional)
(Only visible if license loaded)
Handset login
(Only visible if Lync/SfB + Security
(TLS, SRTP) License is loaded)
Wireless Server Configuration - Application interface
Username
New password (Optional)
14215700-IG, Edition 8.0
April 2018, Original document
TOS/DiffServ values can be configured for PTP pack-
ets used for LAN sync. The values are entered in
decimal.
Network priority: Packets with higher TOS/DiffServ
have higher priority on the network.
184 = critical (highest priority)
96 = flash
64 = immediate
32 = priority
0 = routine (lowest priority)
Default value: 184 (Expedited Forwarding)
Enabled by default when Handset Sharing License is
loaded.
Disable this, if handset sharing is not to be allowed.
For more information about using handset sharing and
configuring handset login, see
page 197.
If enabled, user credentials can be entered on the
handset and no user configuration is required on the
server. Use long key press 9 to login. (System depend-
ant).
For more information, see
Login" on page 202 and Handset User Guides.
Enter username required to access the application
interface.
Max. length: 31 characters.
Enter password required to access the application
interface.
Max. length: 31 characters.
"Handset Sharing" on
"Configuring Handset
205