Software Version Of A Compile Cycle - Siemens SINUMERIK 840D sl Function Manual

9.3

Software version of a compile cycle

The SW version of a compile cycle is displayed under:
HMI Advanced:
Diagnosis > Service Display > Version > NCU Version
Display (excerpt)
-------------------------------------------
CC Interface Version:
@NCKOPI . . . .
Loaded Compile Cycles:
Identifier
<
CC start address
_N_<
Code=<
-------------------------------------------
Example:
_N_CLC407IF003001_ELF corresponds to software version 4.7
Note
The display of code and data range start addresses of a compile cycle are provided for
diagnostics purposes only and have no significance in normal operation.
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Version Generation Data
> < > <
Identifier
><Version>IF<
Address Address
> Data=<
TE01: Installation and activation of loadable compile cycles
>
1st digit 2nd digit
>< >_ELF . . .
> . . .
9.3 Software version of a compile cycle
441