Siemens SINUMERIK 840D sl Function Manual page 784

Glossary
Workpiece coordinate system
The workpiece coordinate system has its starting point in the → workpiece zero-point. In
machining operations programmed in the workpiece coordinate system, the dimensions and
directions refer to this system.
Workpiece zero
The workpiece zero is the starting point for the → workpiece coordinate system. It is defined
in terms of distances to the → machine zero.
Zero offset
Specifies a new reference point for a coordinate system through reference to an existing zero
point and a → frame.
1. Settable
SINUMERIK 840D: A configurable number of settable zero offsets are available for each
CNC axis. The offsets - which are selected by means of G functions - take effect
alternately.
2. External
In addition to all the offsets which define the position of the workpiece zero, an external
zero offset can be overridden by means of the handwheel (DRF offset) or from the PLC.
3. Programmable
Zero offsets can be programmed for all path and positioning axes using the TRANS
statement.
784
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions