F2: Multi-axis transformations
1.10 Orientation axes
•
MD21134 $MC_ORI_MODULO_RANGE[0...2]
(Size of the modulo range for the display of the orientation axes)
•
MD21136 $MC_ORI_MODULO_RANGE_START[0...2]
(Starting position of the modulo range for the display of the orientation axes)
Please note the following:
•
The machine data becomes effective with NewConfig.
•
The machine data does not have any influence or effects on:
-
-
-
108
any axis positions that can be programmed for these axes.
The traversing movements of these axes.
The display of the MCS values of these axes
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions