Adapt Adaptive Cycle - Siemens SINUMERIK 840D sl Function Manual

M3: Coupled axes
5.8 Examples
5.8.4.2

Adapt adaptive cycle

Target
Coupled motion in the machine co-ordinate system must be possible with the existing
coupling command TRAILON. The adaptive cycle for TRAILON is supplemented with the
coupling characteristic "Co-ordinate reference" (CPFRS).
Procedure
1. Copy adaptive cycle 700 from directory "CST" to directory "CMA".
2. Supplement cycle 700 with the following entry:
CPFRS[_FA]="MCS"
3. Comment to cycle changes (e.g. user version number and change date).
4. Save cycle.
Figure 5-14
356
Cycle 700 after adaption. Changes are indicated by a colored bar.
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions