K6: Contour tunnel monitoring
4.3 Programmable contour accuracy
RESET/end of program
On RESET/program end the response set in the following machine data for the G code group
39 will become effective:
MD20110 $MC_RESET_MODE_MASK (definition of initial control settings after RESET/TP-
End)
MD20112 $MC_START_MODE_MASK (definition of the control default settings in case of NC
START)
e.g. for programmable contour accuracies there are no particularities.
198
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions