RESET response
In reset events:
•
NCK POWER ON RESET (warm start)
•
NCK Reset
•
End of program (M30)
CC_PREPRE(-1) is executed implicitly.
Error messages
The following programming errors are detected and displayed with alarms:
•
Invalid mode programmed:
RESU alarm 75601 "Channel
CC_PREPRE( )"
•
More than one parameter programmed:
Alarm 12340 "Channel
•
RESU technology function is not available:
The technological function is not available. The compile cycle is possibly not loaded or it
was not activated.
Alarm 12340 "Channel
not available"
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
number
number
Block
number
number
Block
Too many parameters"
number
number
Block
Name CC_PREPRE not defined or option
TE7: Continue machining - retrace support
Invalid parameter for
15.4 Programming
627