Implicit Creation And Deletion Of Coupling Modules - Siemens SINUMERIK 840D sl Function Manual

M3: Coupled axes
5.5 Generic coupling
Programming
Syntax:
Identifiers:
Functionality:
Leading axis/
spindle:
Example:
Programming
CPLOF[X2]=(X1)
Constraints
CPLOF can be programmed in synchronous actions.
5.5.4.5

Implicit creation and deletion of coupling modules

Switch-on commands may also be used to create coupling modules (without prior definition
with CPDEF).
Example
Programming
CPON=(X2) CPLA[X2]=(X1)
or
CPLON[X2]=(X1)
...
CPOF=(X2)
284
CPLOF[FAx]= (<leading axis/spindle>)
Coupling Lead Axis Off
Deactivates the coupling of a leading axis/spindle to the following axis/
spindle FAx.
Type: AXIS
Range of values: Axes of the channel
Comment
; The coupling of leading axis X1 to following axis X2 is
deactivated.
Comment
; Creates a coupling module for following axis X2 with
leading axis X1 and activates the coupling module.
; After its deactivation, the implicitly created
coupling module is deleted.
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions