Behavior Of The Following Axis At Switch-On (Cpfmon) - Siemens SINUMERIK 840D sl Function Manual

Example:
Programming
CPFMSON[X2]="CFAST"
5.5.5.8

Behavior of the following axis at switch-on (CPFMON)

The behavior of the following axis/spindle during switch-on of the coupling can be
programmed with the keyword CPFMON.
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
"NRGP" Next Ratio Gap Path
Optimized
"ACN" Absolute Co-ordinate
Negative
"ACP" Absolute Coordinate
Positive
"DCT" Direct Co-ordinate
Time Optimized
"DCP" Direct Co-ordinate
Path Optimized
Default value: "CFAST"
The next segment is
approached in a path-
optimized manner, in
accordance with the ratio of
the number of gears to the
number of teeth.
For rotary axes only!
The rotary axis traverses
towards the synchronized
position in the negative axis
direction. Synchronization is
effected immediately.
For rotary axes only!
The rotary axis traverses to
the synchronized position in
the positive axis direction.
Synchronization is effected
immediately.
For rotary axes only!
The rotary axis traverses to
the programmed
synchronized position in
time-optimized fashion.
Synchronization is effected
immediately.
For rotary axes only!
The rotary axis traverses to
the programmed
synchronized position in
path-optimized fashion.
Synchronization is effected
immediately.
Comment
; CFAST is taken as synchronization mode of the coupling
to following axis X2.
M3: Coupled axes
5.5 Generic coupling
295