Te01: Installation And Activation Of Loadable Compile Cycles - Siemens SINUMERIK 840D sl Function Manual

TE01: Installation and activation of loadable compile
cycles
Contents
A description is provided in the following chapters as to how technology functions, available
from Siemens, can be installed and activated in the control as individual loadable compile
cycles.
Technology functions
The description is a general description and applies to all the following technology functions:
• 1D/3D clearance control in position control cycle
Compile cycle: CCCLC.ELF
References: Function Manual Special Functions; Clearance Control (TE1)
• Handling transformation package
Compile cycle: CCRCTRA.ELF
References: Function Manual Special Functions; Handling Transformation Package (TE4)
• Setpoint exchange
Compile cycle: CCSETP.ELF
References: Function Manual Special Functions; Setpoint Changeover (S9)
• Axial coupling in the machine coordinate system (MCS coupling)
Compile cycle: CCMCSC.ELF
References: Function Manual Special Functions; MCS Coupling (TE6)
• Continue machining at the contour (retrace support)
Compile cycle: CCRESU
References: Function Manual Special Functions; Retrace Support (TE7)
• Fast laser switching signal
Compile cycle: CCHSLC.ELF
References: Function Manual Special Functions; Cycle-Independent Path-Synchronous
Signal Output (TE8)
• Axis pair collision protection
Compile cycle: CCPROT.ELF
References: Function Manual Special Functions; Axis Pair Collision Protection (TE9)
The description also applies to user-specific technological functions.
Special Functions
Function Manual 09/2011, 6FC5397-2BP40-2BA0
9
433