Examples; General Information About Start-Up - Siemens SINUMERIK 840D sl Function Manual

TE4: Transformation package handling

13.14 Examples

13.14 Examples
13.14.1

General information about start-up

Note
The compile cycles are supplied as loadable modules. The general start up of such compile
cycles is described in TE01. The specific installation measures for this compile cycle can be
found from Section "Starting up a kinematic transformation" onwards.
Requirement
HMI software version must be 3.5 or higher. An NCK-OEM Jeida card (technology card 2 or
higher) must be available for 840D.
Procedure
Saving SRAM contents
As the first step in the installation of a compile cycle function for 840D, the technology card is
exchanged for the original card provided in the NCU.
This step is equivalent to any procedure which involves the normal upgrade of your software
platform and requires the deletion of any (battery-supported) static control memory. To avoid
the consequential loss of all data in the SRAM, back up the SRAM before performing the
operation. For a detailed description, please see the Manufacturer/Service Documentation
"SINUMERIK 840D/SIMODRIVE 611D Installation and Start-Up Guide":
1. Enter the machine manufacturer password.
2. Switch to the "Services" operating area.
3. Press the "Series start-up" softkey.
4. Select "NC" and "PLC" as the areas to be saved and enter a name of your choice for the
archive file to be created on the hard disk. Finish by pressing the RETURN key.
5. If the control system contains machine-specific compensation data, then these must be
saved in a separate archive file:
-
-
-
-
-
Keep the archive files you have created in a safe place. They will allow you to restore original
settings in your system.
592
Press the softkey "Data from 2" and select the data from the "NC active data" menu
according to your needs
"Measuring system compensations"
"Sag/angularity comp."
"Quadrant error compensation".
Save this data by selecting softkey "Archive..." and enter another file name for a
second archive file.
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Special Functions