Siemens SINUMERIK 840D sl Function Manual page 439

Interface versions
The relevant interface versions are displayed under:
• Interface version of the NCK system software
HMI Advanced:
Diagnosis > Service Display > Version > NCU Version
Display (excerpt)
-------------------------------------------
CC Interface Version:
@NCKOPI . . . .@Interfaces=<
Loaded Compile Cycles:
. . . .
-------------------------------------------
• Interface version of a compile cycle that has not yet been loaded
HMI Advanced (excerpt):
Services > <
Display:
-------------------------------------------
Contents: Loadable compile cycle
Interface: . . . . @Interfaces=<
-------------------------------------------
• Interface version of a loaded compile cycle
HMI Advanced:
Diagnosis > Service Display > Version > NCU Version
Display (excerpt)
-------------------------------------------
CC Interface Version:
@NCKOPI . . . .
Loaded Compile Cycles:
<
CC start address
_N_<
-------------------------------------------
Example:
_N_CLC407IF003001_ELF corresponds to interface version: 3.1
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Medium
> > Softkey: "Properties"
Identifier Version Generation Data
> < > <
Identifier Version
>< >IF<
TE01: Installation and activation of loadable compile cycles
1st digit 2nd digit
>.< > . . . .
1st digit 2nd digit
>.< > . . . .
>
1st digit 2nd digit
>< >_ELF . . .
9.2 Interface version compatibility
439