Table of Contents
Advertisement
6.15 INTEGrate Group
The commands in this group deal with integration.
You can make the same settings and inquiries as when INTEG on the front panel is used.
:INTEGrate?
Function
Queries all settings related to the integration.
Syntax
:INTEGrate?
Example
:INTEGRATE? -> :INTEGRATE:
MODE NORMAL;ACAL 0;TIMER 1,0,0
:INTEGrate:ACAL
Function
Turns ON/OFF the auto calibration or queries
the current setting.
Syntax
:INTEGrate:ACAL {<Boolean>}
:INTEGrate:ACAL?
Example
:INTEGRATE:ACAL OFF
:INTEGRATE:ACAL? ->
:INTEGRATE:ACAL 0
:INTEGrate:MODE
Function
Sets the integration mode or queries the current
setting.
Syntax
:INTEGrate:MODE {NORMal|CONTinuous|
RNORmal|RCONtinuous}
:INTEGrate:MODE?
NORMal = Normal integration mode
CONTinuous = Continuous integration mode
RNORmal = Real-time normal integration mode
RCONtinuous = Real-time continuous
integration mode
Example
:INTEGRATE:MODE NORMAL
:INTEGRATE:MODE? ->
:INTEGRATE:MODE NORMAL
:INTEGrate:RESet
Function
Resets the integrated value.
Syntax
:INTEGrate:RESet
Example
:INTEGRATE:RESET
:INTEGrate:RTIMe?
Function
Queries the integration start and stop times for
real-time integration mode.
Syntax
:INTEGrate:RTIMe<x>?
Example
:INTEGRATE:RTIME? ->
:INTEGRATE:RTIME:
START 2005,1,1,0,0,0;
END 2005,1,1,1,0,0
6-74
:INTEGrate:RTIMe:{STARt|END}
Function
Sets the integration {start|stop} time for real-
time integration mode or queries the current
setting.
Syntax
:INTEGrate:RTIMe:{STARt|
END} {<NRf>,<NRf>,<NRf>,<NRf>,
<NRf>,<NRf>}
:INTEGrate:RTIMe:{STARt|END}?
{<NRf>, <NRf>, <NRf>, <NRf>, <NRf>, <NRf>}
= 2001, 1, 1, 0, 0, 0 to 2099, 12, 31, 23, 59, 59
1st <NRf> = 2001 to 2099 (year)
2nd <NRf> = 1 to 12
3rd <NRf> = 1 to 31
4th <NRf> = 0 to 23
5th <NRf> = 0 to 59
6th <NRf> = 0 to 59
Example
:INTEGRATE:RTIME:
START 2005,1,1,0,0,0
:INTEGRATE:RTIME:START? ->
:INTEGRATE:RTIME:
START 2005,1,1,0,0,0
:INTEGrate:STARt
Function
Starts integration.
Syntax
:INTEGrate:STARt
Example
:INTEGRATE:START
:INTEGrate:STATe?
Function
Queries the integration condition.
Syntax
:INTEGrate:STATe?
Example
:INTEGRATE:STATE? -> RESET
Description The response information is as follows:
RESet = Integration reset
READy = Waiting (real-time integration mode)
STARt = Integration in progress
STOP = Integration stop
ERRor = Abnormal integration termination
(integration overflow, power failure)
TIMeup = Integration stop due to integration
timer time
:INTEGrate:STOP
Function
Stops integration.
Syntax
:INTEGrate:STOP
Example
:INTEGRATE:STOP
(month)
(day)
(hour)
(minute)
(second)
IM 760301-17E
Advertisement
Table of Contents
