YOKOGAWA WT3000 User Manual page 137

6.18 NUMeric Group
:NUMeric:LIST:SELect
Function Sets the output component of the numeric list
data of harmonic measurement or queries the
current setting.
Syntax :NUMeric:LIST:SELect {EVEN|ODD|ALL}
:NUMeric:LIST:SELect?
Example :NUMERIC:LIST:SELECT ALL
:NUMERIC:LIST:SELECT? ->
:NUMERIC:LIST:SELECT ALL
Description • This command is valid only on models with
the advanced computation function (/G6
option) or the harmonic measurement
function (/G5 option).
• The selections are as shown below:
EVEN = Outputs the components of TOTal,
DC, and even order harmonic
ODD = Outputs the components of TOTal,
DC, and odd order harmonic
ALL = Outputs all components
6-94
:NUMeric:LIST:VALue?
Function Queries the numeric list data of harmonic
measurement.
Syntax :NUMeric:LIST:VALue? {<NRf>}
<NRf> = 1 to 64 (item number)
Example • Example when <NRf> is specified
:NUMERIC:LIST:VALUE? 1 ->
103.58E+00,0.00E+00,103.53E+00,
0.09E+00,2.07E+00,0.04E+00,
..(omitted)..,0.01E+00,0.01E+00 (up to
102 items of data)
• Example when <NRf> is omitted (when
":NUMeric:LIST:NUMber" is 5)
:NUMERIC:LIST:VALUE? ->
103.58E+00,0.00E+00,103.53E+00,
0.09E+00,2.07E+00,0.04E+00,
..(omitted)..,0.00E+00,0.00E+00 (up to
102*5 = 510 items of data)
• Example in which ":NUMeric:FORMat" is set
to "FLOat"
:NUMERIC:LIST:VALUE? -> #6(number
of bytes, 6 digits)(data byte sequence)
Description • This command is valid only on models with
the advanced computation function (/G6
option) or the harmonic measurement
function (/G5 option).
• A single numeric list data consists of up to
102 items of numeric data in the following
order: TOTal, DC, 1st order, ...
":NUMeric:LIST:ORDer."
• If <NRf> is specified, only the numeric list
data of the item number is output (up to 102
items of data).
• If <NRf> is omitted, the numeric list data of
item numbers from 1 to
":NUMeric:LIST:NUMber" is output in
order (up to 102*":NUMeric:LIST:NUMber"
items of data).
• For the format of the individual numeric data
that is output, see "Numeric Data Format" at
the end of this group of commands (see page
6-97).
IM 760301-17E