YOKOGAWA WT3000 User Manual page 45

6.1 A List of Commands
Command
:CBCycle:STATe?
:CBCycle:SYNChronize?
:CBCycle:SYNChronize:SLOPe
:CBCycle:SYNChronize:SOURce
:CBCycle:TIMEout
:CBCycle:TRIGger?
:CBCycle:TRIGger:LEVel
:CBCycle:TRIGger:MODE
:CBCycle:TRIGger:SLOPe
:CBCycle:TRIGger:SOURce
COMMunicate Group
:COMMunicate?
:COMMunicate:HEADer
:COMMunicate:LOCKout
:COMMunicate:OPSE
:COMMunicate:OPSR?
:COMMunicate:OVERlap
:COMMunicate:REMote
:COMMunicate:STATus?
:COMMunicate:VERBose
:COMMunicate:WAIT
:COMMunicate:WAIT?
CURSor Group
:CURSor?
:CURSor:BAR?
:CURSor:BAR:POSition<x>
:CURSor:BAR[:STATe]
:CURSor:BAR:{Y<x>|DY}?
:CURSor:FFT?
:CURSor:FFT:POSition<x>
:CURSor:FFT[:STATe]
:CURSor:FFT:TRACe<x>
:CURSor:FFT:{X<x>|DX|Y<x>|DY}?
:CURSor:TRENd?
:CURSor:TRENd:POSition<x>
:CURSor:TRENd[:STATe]
:CURSor:TRENd:TRACe<x>
:CURSor:TRENd:{X<x>|Y<x>|DY}?
6-2
Function
Queries the Cycle by Cycle measurement status.
Queries all settings related to the synchronization source of Cycle by Cycle
measurement.
Sets the slope of the synchronization source of Cycle by Cycle measurement
or queries the current setting.
Sets the synchronization source for Cycle by Cycle measurement or queries
the current setting.
Sets the timeout value for Cycle by Cycle measurement or queries the current
setting.
Queries all settings related to triggers.
Sets the trigger level or queries the current setting.
Sets the trigger mode or queries the current setting.
Sets the trigger slope or queries the current setting.
Sets the trigger source or queries the current setting.
Queries all settings related to communications.
Sets whether to add a header to the response to a query or queries the
current setting.
Sets or clears local lockout.
Sets the overlap command that is to be used by the *OPC, *OPC?,
and *WAI commands or queries the current setting.
Queries the operation pending status register.
Sets the commands that will operate as overlap commands or queries the
current setting.
Sets remote or local.
Queries line-specific status.
Sets the response messages to full form or abbreviated form or queries
the current setting.
Waits for a specified extended event.
Creates the response that is returned when the specified event occurs.
Queries all settings related to the cursor measurement.
Queries all settings related to the cursor measurement of the bar graph
display.
Sets the cursor position (order) on the bar graph display or queries the
current setting.
Turns ON/OFF the cursor display on the bar graph or queries the
current setting.
Queries the cursor measurement value on the bar graph display.
Queries all settings related to the cursor measurement on the FFT
waveform display.
Sets the cursor position on the FFT waveform display or queries the
current setting.
Turns ON/OFF the cursor display on the FFT waveform display or queries
the current setting.
Sets the cursor target on the FFT waveform display or queries the
current setting.
Queries the cursor measurement value on the FFT waveform display.
Queries all settings related to the cursor measurement of the trend display.
Sets the cursor position on the trend or queries the current setting.
Turns ON/OFF the cursor display on the trend display or queries the
current setting.
Sets the cursor target on the trend or queries the current setting.
Queries the cursor measurement value on the trend display.
Page
6-22
6-22
6-22
6-23
6-23
6-23
6-23
6-23
6-23
6-23
6-24
6-24
6-24
6-24
6-24
6-24
6-24
6-25
6-25
6-25
6-25
6-26
6-26
6-26
6-26
6-26
6-26
6-26
6-27
6-27
6-27
6-27
6-27
6-27
6-27
6-27
IM 760301-17E