Input Group - YOKOGAWA WT3000 User Manual

6.14 INPut Group

The commands in this group deal with the measurement condition of the input element.
You can make the same settings and inquiries as when the keys in the measurement condition setup area (area
enclosed in light blue), SCALING, LINE FILTER, FREQ FILTER (SHIFT+LINE FILTER), SYNC SOURCE, and
NULL(SHIFT+SYNC SOURCE) on the front panel are used.
:INPut?
Function Queries all settings related to the input element.
Syntax :INPut?
Example :INPUT? -> :INPUT:CFACTOR 3;
WIRING P1W2,P1W2,P1W2,P1W2;
INDEPENDENT 0;VOLTAGE:RANGE:
ELEMENT1 1.000E+03;
ELEMENT2 1.000E+03;
ELEMENT3 1.000E+03;
ELEMENT4 1.000E+03;:INPUT:VOLTAGE:
AUTO:ELEMENT1 0;ELEMENT2 0;
ELEMENT3 0;ELEMENT4 0;:INPUT:
VOLTAGE:MODE:ELEMENT1 RMS;
ELEMENT2 RMS;ELEMENT3 RMS;
ELEMENT4 RMS;:INPUT:CURRENT:RANGE:
ELEMENT1 30.0E+00;
ELEMENT2 30.0E+00;
ELEMENT3 30.0E+00;
ELEMENT4 30.0E+00;:INPUT:CURRENT:
AUTO:ELEMENT1 0;ELEMENT2 0;
ELEMENT3 0;ELEMENT4 0;:INPUT:
CURRENT:MODE:ELEMENT1 RMS;
ELEMENT2 RMS;ELEMENT3 RMS;
ELEMENT4 RMS;:INPUT:CURRENT:SRATIO:
ELEMENT1 10.0000;ELEMENT2 10.0000;
ELEMENT3 10.0000;ELEMENT4 10.0000;:
INPUT:FILTER:LINE:ELEMENT1 OFF;
ELEMENT2 OFF;ELEMENT3 OFF;
ELEMENT4 OFF;:INPUT:FILTER:
FREQUENCY:ELEMENT1 0;ELEMENT2 0;
ELEMENT3 0;ELEMENT4 0;:INPUT:
SCALING:STATE:ELEMENT1 0;
ELEMENT2 0;ELEMENT3 0;ELEMENT4 0;:
INPUT:SCALING:VT:ELEMENT1 1.0000;
ELEMENT2 1.0000;ELEMENT3 1.0000;
ELEMENT4 1.0000;:INPUT:SCALING:CT:
ELEMENT1 1.0000;ELEMENT2 1.0000;
ELEMENT3 1.0000;ELEMENT4 1.0000;:
INPUT:SCALING:SFACTOR:
ELEMENT1 1.0000;ELEMENT2 1.0000;
ELEMENT3 1.0000;ELEMENT4 1.0000;:
INPUT:SYNCHRONIZE:ELEMENT1 I1;
ELEMENT2 I2;ELEMENT3 I3;
ELEMENT4 I4;:INPUT:NULL 0
6-66
[:INPut]:CFACtor
Function Sets the crest factor or queries the current
setting.
Syntax [:INPut]:CFACtor {<NRf>}
[:INPut]:CFACtor?
<NRf> = 3 or 6
Example :INPUT:CFACTOR 3
:INPUT:CFACTOR? -> :INPUT:CFACTOR 3
[:INPut]:CURRent?
Function Queries all settings related to the current
measurement.
Syntax [:INPut]:CURRent?
Example :INPUT:CURRENT? -> :INPUT:CURRENT:
RANGE:ELEMENT1 30.0E+00;
ELEMENT2 30.0E+00;
ELEMENT3 30.0E+00;
ELEMENT4 30.0E+00;:INPUT:CURRENT:
AUTO:ELEMENT1 0;ELEMENT2 0;
ELEMENT3 0;ELEMENT4 0;:INPUT:
CURRENT:MODE:ELEMENT1 RMS;
ELEMENT2 RMS;ELEMENT3 RMS;
ELEMENT4 RMS;:INPUT:CURRENT:SRATIO:
ELEMENT1 10.0000;ELEMENT2 10.0000;
ELEMENT3 10.0000;ELEMENT4 10.0000
[:INPut]:CURRent:AUTO?
Function Queries the current auto range setting (ON/
OFF) of all elements.
Syntax [:INPut]:CURRent:AUTO?
Example :INPUT:CURRENT:AUTO? ->
:INPUT:CURRENT:AUTO:ELEMENT1 0;
ELEMENT2 0;ELEMENT3 0;ELEMENT4 0
[:INPut]:CURRent:AUTO[:ALL]
Function Collectively turns ON/OFF the current auto
range of all elements.
Syntax [:INPut]:CURRent:AUTO
[:ALL] {<Boolean>}
Example :INPUT:CURRENT:AUTO:ALL ON
IM 760301-17E