Explanation
IM 760301-17E
You can control the WT3000 from a PC using the USB interface. YOKOGAWA's
dedicated USB connection device driver and library software (TMCTL) must be installed
on the PC in addition to entering the settings described above.
Setting the ID Value
Set the ID value of the WT3000 within the following range.
1 to 127
You can connect multiple devices to a controller using the USB interface. If multiple
devices are connected in a single USB system, the ID value is used by the controller to
identify each device. Therefore, a unique ID value must be assigned to each device
within a single system.
Note
Do not change the ID value while communicating via the USB interface.
3.4 Setting the USB Control
3-5
1
2
3
4
5
6
7
App
Index