YOKOGAWA WT3000 User Manual page 128

:NUMeric:CBCycle:VALue?
Function Queries the numeric list data from Cycle by
Cycle measurement.
Syntax :NUMeric:CBCycle:VALue?
{<Function>,<Element>}
:NUMeric:CBCycle:VALue?
<Function> = {FREQ|U|I|P|S|Q|LAMBda|
SPEed|TORQue|PM|PKU|PKI|PKSPeed|
PKTorque}
<Element> = {<NRf>|SIGMA|SIGMB} (<NRf>
= 1 to 4)
Example • Example when parameters specified
(For :NUMeric:CBCycle:STARt 1;END
100)
:NUMERIC:CBCYCLE:VALUE? U,1 ->
100.001E+00,100.002E+00,
100.003E+00,100.004E+00,
..(ommitted)..,100.099E+00,
100.100E+00
• Example when parameters omitted
(For :NUMeric:CBCycle:ITEM U,1)
:NUMERIC:CBCYCLE:VALUE? ->
100.001E+00,100.002E+00,
100.003E+00,100.004E+00,
..(ommitted)..,100.099E+00,
100.100E+00
• Example in which ":NUMeric:FORMat" is set
to FLOat.
:NUMERIC:CBCYCLE:VALUE? -> #6
(number of bytes, six digits) (data byte
sequence)
Description • Only available with the Cycle by Cycle
function (/CC option).
• Numeric list data consists of up to 3000
numeric data from
":NUMeric:CBCycle:STARt" to
":Numeric:CBCycle:END".
• If a parameters are specified, the numeric list
data of that item is output. For a description of
the contents of <Function> and <Element>,
see the description for
":NUMeric:CBCycle:ITEM".
• If the parameter is omitted, the numeric list
data for the items specified in
":NUMeric:CBCycle:ITEM" is output.
• For the format of the individual numeric data
that are output, see "Numeric Data Format" at
the end of this group (page 6-98).
IM 760301-17E
:NUMeric:FLICker?
Function Queries all settings related to output of numeric
data from flicker measurement.
Syntax :NUMeric:FLICker?
Example :NUMERIC:FLICKER? -> :NUMERIC:
FLICKER:FUNCTION:NUMBER 8;
ITEM1 TIME;ITEM2 UN,1;ITEM3 FU,1;
ITEM4 DC,1,CURRENT;ITEM5 DMAX,1,
CURRENT;ITEM6 DT,1,CURRENT;
ITEM7 PST,1,CURRENT;ITEM8 PLT,1;:
NUMERIC:FLICKER:INFORMATION:
NUMBER 7;ITEM1 JTOTAL,TOTAL;
ITEM2 JDC,1,ALL;ITEM3 JDMAX,1,ALL;
ITEM4 JDT,1,ALL;ITEM5 JPST,1,ALL;
ITEM6 JPLT,1;ITEM7 JTOTAL,1
Description Only available with the flicker measurement
function (/FL option).
:NUMeric:FLICker:COUNt?
Function Queries the number of the measurement within
the specified observation period at which flicker
measurement stops.
Syntax :NUMeric:FLICker:COUNt?
Example :NUMERIC:FLICKER:COUNT? -> 0
Description • Only available with the flicker measurement
function (/FL option).
• Returns the number displayed on the right of
the Count bar graph in the flicker
measurement display screen.
:NUMeric:FLICker:FUNCtion?
Function Queries all settings related to output of
measured flicker data (variable format).
Syntax :NUMeric:FLICker:FUNCtion?
Example :NUMERIC:FLICKER:FUNCTION? ->
:NUMERIC:FLICKER:FUNCTION:NUMBER 8;
ITEM1 TIME;ITEM2 UN,1;ITEM3 FU,1;
ITEM4 DC,1,CURRENT;ITEM5 DMAX,1,
CURRENT;ITEM6 DT,1,CURRENT;
ITEM7 PST,1,CURRENT;ITEM8 PLT,1
Description • Only available with the flicker measurement
function (/FL option).
• For the values of
":NUMeric:FLICker:FUNCtion:ITEM<x>",
only the number of numeric data output items
specified in
":NUMeric:FLICker:FUNCtion:NUMber"
are output.
6.18 NUMeric Group
App
Index
6-85
1
2
3
4
5
6
7