YOKOGAWA WT3000 User Manual page 51

6.1 A List of Commands
Command
:FLICker:PST[:STATe]
:FLICker:RESet
:FLICker:STARt
:FLICker:STATe?
:FLICker:UN?
:FLICker:UN:MODE
:FLICker:UN:VALue
HARMonics Group
:HARMonics?
:HARMonics:FBANd
:HARMonics:IEC?
:HARMonics:IEC:OBJect
:HARMonics:IEC:{UGRouping|IGRouping}
:HARMonics:ORDer
:HARMonics:PLLSource
:HARMonics:PLLWarning?
:HARMonics:PLLWarning[:STATe]
:HARMonics:THD
HCOPy Group
:HCOPy?
:HCOPy:ABORt
:HCOPy:AUTO?
:HCOPy:AUTO:INTerval
:HCOPy:AUTO:{STARt|END}
:HCOPy:AUTO[:STATe]
:HCOPy:AUTO:SYNChronize
:HCOPy:COMMent
:HCOPy:DIRection
:HCOPy:EXECute
:HCOPy:NETPrint?
:HCOPy:NETPrint:COLor
:HCOPy:NETPrint:FORMat
:HCOPy:PRINter?
:HCOPy:PRINter:FEED
:HCOPy:PRINter:FORMat
:HCOPy:PRINter:LIST?
:HCOPy:PRINter:LIST:INFOrmation
:HCOPy:PRINter:LIST:NORMal?
6-8
Function
Turns ON/OFF judgment of the short-term flicker value Pst or queries the
current setting.
Resets measured flicker data.
Starts flicker measurement.
Queries the status of flicker measurement.
Queries all settings related to rated voltage Un.
Sets the assignment method for rated voltage Un or queries the current
setting.
Sets the predefined rated voltage Un or queries the current setting.
Queries all settings related to harmonic measurement.
Sets the frequency bandwidth of the harmonic measurement or queries the
current setting.
Queries all settings related to IEC harmonic measurement.
Sets the IEC harmonic measurement target or queries the current setting.
Sets the {voltage|current} grouping of the IEC harmonic measurement or
queries the current setting.
Sets the maximum and minimum orders to be measured or queries the
current setting.
Sets the PLL source or queries the current setting.
Queries all settings related to the warning messages of the PLL source.
Sets whether to generate a warning message when the PLL source is not
applied or queries the current setting.
Sets the equation used to compute the THD (total harmonic distortion) or
queries the current setting.
Queries all settings related to printing.
Aborts printing or paper feeding.
Queries all settings related to the auto print.
Sets the auto print interval or queries the current setting.
Sets the {start|stop} reservation time of the auto print or queries the current
setting.
Turns ON/OFF the auto print or queries the current setting.
Sets the synchronization mode of the auto print or queries the current setting. 6-59
Sets the comment displayed at the bottom of the screen or queries the
current setting.
Sets the printer or queries the current setting.
Executes the print operation.
Queries all settings related to printing using a network printer.
Turns ON/OFF color printing on the network printer or queries the current
setting.
Sets the printer description language for printing on a network printer or
queries the current setting.
Queries all settings related to printing when using the built-in printer.
Executes paper feeding of the built-in printer.
Sets the contents to be printed on the built-in printer or queries the current
setting.
Queries all settings related to the printing of the numeric data list using the
built-in printer.
Sets whether to add setup parameters when printing the numeric data list
using the built-in printer or queries the current setting.
Queries all settings related to the printed items of the numeric data list
using the built-in printer.
Page
6-55
6-55
6-55
6-55
6-55
6-55
6-56
6-57
6-57
6-57
6-57
6-57
6-57
6-58
6-58
6-58
6-58
6-59
6-59
6-59
6-59
6-59
6-59
6-60
6-60
6-60
6-60
6-60
6-60
6-60
6-60
6-60
6-61
6-61
6-61
IM 760301-17E