YOKOGAWA WT3000 User Manual page 85

6.7 DISPlay Group
:DISPlay:WAVE:MAPPing:{U<x>|I<x>|SPEed|
TORQue|MATH<x>}
Sets the mapping of the {voltage|current|
Function
rotating speed|torque|
waveform computation} waveform to the
split screen or queries the current setting.
Syntax :DISPlay:WAVE:MAPPing:{U<x>|I<x>|
SPEed|TORQue|MATH<x>} {<NRf>}
:DISPlay:WAVE:MAPPing:{U<x>|I<x>|
SPEed|TORQue|MATH<x>}?
<x> of U<x>, I<x> = 1 to 4 (element)
<x> of MATH<x> = 1 to 2 (MATH)
<NRf> = 0 to 3
Example :DISPLAY:WAVE:MAPPING:U1 0
:DISPLAY:WAVE:MAPPING:U1? ->
:DISPLAY:WAVE:MAPPING:U1 0
Description • This command is valid when the waveform
mapping method (:DISPlay:WAVE:
MAPPing[:MODE]) is set to "USER."
• {SPEed|TORQue} are valid only on the
motor version (-MV).
• MATH<x> is valid only on models with the
advanced computation function (/G6 option).
:DISPlay:WAVE:POSition?
Function Queries all settings related to the vertical
position (level of the center position) of the
waveform.
Syntax :DISPlay:WAVE:POSition?
Example :DISPLAY:WAVE:POSITION? ->
:DISPLAY:WAVE:POSITION:U1 0.000;
U2 0.000;U3 0.000;U4 0.000;
I1 0.000;I2 0.000;I3 0.000;I4 0.000
:DISPlay:WAVE:POSition:{UALL|IALL}
Function Collectively sets the vertical position (level of
the center position) of the waveform
{voltage|current} of all elements.
Syntax :DISPlay:WAVE:POSition:{UALL|
IALL} {<NRf>}
<NRf> = –130.000 to 130.000(%)
Example :DISPLAY:WAVE:POSITION:UALL 0
:DISPlay:WAVE:POSition:{U<x>|I<x>}
Function Sets the vertical position (level of the center
position) of the waveform {voltage|current} of
the element or queries the current setting.
Syntax :DISPlay:WAVE:POSition:{U<x>|
I<x>} {<NRf>}
:DISPlay:WAVE:POSition:{U<x>|I<x>}?
<x> = 1 to 4 (element)
<NRf> = –130.000 to 130.000(%)
Example :DISPLAY:WAVE:POSITION:U1 0
:DISPLAY:WAVE:POSITION:U1? ->
:DISPLAY:WAVE:POSITION:U1 0.000
6-42
:DISPlay:WAVE:SVALue (Scale VALue)
Function Turns ON/OFF the scale value display or
queries the current setting.
Syntax :DISPlay:WAVE:SVALue {<Boolean>}
:DISPlay:WAVE:SVALue?
Example :DISPLAY:WAVE:SVALUE ON
:DISPLAY:WAVE:SVALUE? ->
:DISPLAY:WAVE:SVALUE 1
:DISPlay:WAVE:TDIV
Function Sets the Time/div value of the waveform or
queries the current setting.
Syntax :DISPlay:WAVE:TDIV {<Time>}
:DISPlay:WAVE:TDIV?
<Time> = 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500
(ms), 1, or 2 (s)
Example :DISPLAY:WAVE:TDIV 5MS
:DISPLAY:WAVE:TDIV? ->
:DISPLAY:WAVE:TDIV 5.0E-03
Description The specifiable Time/div value is up to 1/10 of
the data update rate (:RATE).
:DISPlay:WAVE:TLABel (Trace LABel)
Function Turns ON/OFF the waveform label display or
queries the current setting.
Syntax :DISPlay:WAVE:TLABel {<Boolean>}
:DISPlay:WAVE:TLABel?
Example :DISPLAY:WAVE:TLABEL OFF
:DISPLAY:WAVE:TLABEL? ->
:DISPLAY:WAVE:TLABEL 0
:DISPlay:WAVE:TRIGger?
Function Queries all settings related to the trigger.
Syntax :DISPlay:WAVE:TRIGger?
Example :DISPLAY:WAVE:TRIGGER? ->
:DISPLAY:WAVE:TRIGGER:MODE AUTO;
SOURCE U1;SLOPE RISE;LEVEL 0.0
:DISPlay:WAVE:TRIGger:LEVel
Function Sets the trigger level or queries the current
setting.
Syntax :DISPlay:WAVE:TRIGger:LEVel {<NRf>}
:DISPlay:WAVE:TRIGger:LEVel?
<NRf> = –100.0 to 100.0 (%) (The resolution is
0.1(%))
Example :DISPLAY:WAVE:TRIGGER:LEVEL 0
:DISPLAY:WAVE:TRIGGER:LEVEL? ->
:DISPLAY:WAVE:TRIGGER:LEVEL 0.0
Description Set the value in terms of a percentage of the full
scale value displayed on the screen.
IM 760301-17E