Table of Contents
Advertisement
IM 760301-17E
Setting the User account (user name and password)
5.
Press the User Account soft key to display the User Account dialog box.
6.
Press the cursor keys to select User Name.
7.
Press SET. A keyboard appears.
8.
Use the keyboard to enter the user name.
For keyboard operations, see section 3.14, "Entering Values and Strings" in the User's
Manual IM760301-01E .
9.
Press the cursor keys to select Password. The password setting is entered
twice.
10.
Press SET. A keyboard appears.
11.
Use the keyboard to enter the password.
•
A password is not required if the login name is anonymous.
For keyboard operations, see section 3.14, "Entering Values and Strings" in the User's
•
Manual IM760301-01E .
Setting the Timeout Value
12.
Press the cursor keys to select Time Out.
13.
Press SET. The timeout value entry box appears.
14.
Press the cursor keys to set the timeout value.
15.
Press SET or ESC to close the box.
Entering TCP/IP Settings
You must enter TCP/IP settings to control the WT3000 from a PC using the Ethernet
interface. For the setup procedure, see section 5.2 in the Expansion Function User's
Manual IM760301-51E .
Restarting the Instrument
You must restart the instrument after changing or entering a new setting for the user
account, timeout value, or TCP/IP in order for the settings to take effect.
4.3 Setting the Ethernet Control
1
2
3
4
5
6
7
App
Index
4-5
Advertisement
Table of Contents
