YOKOGAWA WT3000 User Manual page 125

6.17 MOTor Group
:MOTor:SPEed:PRANge
Function Sets the range of the rotating speed (pulse input
format) or queries the current setting.
Syntax :MOTor:SPEed:PRANge {<NRf>,<NRf>}
:MOTor:SPEed:PRANge?
<NRf> = 0.0000 to 99999.9999
Example :MOTOR:SPEED:PRANGE 10000,0
:MOTOR:SPEED:PRANGE? ->
:MOTOR:SPEED:
PRANGE 10000.0000,0.0000
Description • Set the upper limit and then the lower limit.
• This command is valid when the revolution
signal input type (:MOTor:SPEed:TYPE) is
"PULSe (pulse input)."
:MOTor:SPEed:PULSe
Function Sets the pulse count of the revolution signal
input (pulse input) or queries the current setting.
Syntax :MOTor:SPEed:PULSe {<NRf>}
:MOTor:SPEed:PULSe?
<NRf> = 1 to 9999
Example :MOTOR:SPEED:PULSE 60
:MOTOR:SPEED:PULSE? ->
:MOTOR:SPEED:PULSE 60
Description This command is valid when the revolution
signal input type (:MOTor:SPEed:TYPE) is
"PULSe (pulse input)."
:MOTor:SPEed:RANGe
Function Sets the voltage range of the revolution signal
input (analog input format) or queries the
current setting.
Syntax :MOTor:SPEed:RANGe {<Voltage>}
:MOTor:SPEed:RANGe?
<voltage> = 1, 2, 5, 10, or 20 (V)
Example :MOTOR:SPEED:RANGE 20V
:MOTOR:SPEED:RANGE? ->
:MOTOR:SPEED:RANGE 20.0E+00
Description This command is valid when the revolution
signal input type (:MOTor:SPEed:TYPE) is
"ANALog (analog input)."
:MOTor:SPEed:SCALing
Function Sets the scaling factor for rotating speed
computation or queries the current setting.
Syntax :MOTor:SPEed:SCALing {<NRf>}
:MOTor:SPEed:SCALing?
<NRf> = 0.0001 to 99999.9999
Example :MOTOR:SPEED:SCALING 1
:MOTOR:SPEED:SCALING? ->
:MOTOR:SPEED:SCALING 1.0000
6-82
:MOTor:SPEed:TYPE
Function Sets the input type of the revolution signal input
or queries the current setting.
Syntax :MOTor:SPEed:TYPE {ANALog|PULSe}
:MOTor:SPEed:TYPE?
Example :MOTOR:SPEED:TYPE ANALOG
:MOTOR:SPEED:TYPE? ->
:MOTOR:SPEED:TYPE ANALOG
:MOTor:SPEed:UNIT
Function Sets the unit to add to the rotating speed
computation result or queries the current
setting.
Syntax :MOTor:SPEed:UNIT {<String>}
:MOTor:SPEed:UNIT?
<String> = Up to 8 characters
Example :MOTOR:SPEED:UNIT "rpm"
:MOTOR:SPEED:UNIT? ->
:MOTOR:SPEED:UNIT "rpm"
Description This command does not affect the computation
result.
:MOTor:SSPeed(Sync SPeed source)
Function Sets the frequency measurement source used
to compute the synchronous speed (SyncSp) or
queries the current setting.
Syntax :MOTor:SSPeed {U<x>|I<x>}
:MOTor:SSPeed?
<x> = 1 to 4 (element)
Example :MOTOR:SSPEED I1
:MOTOR:SSPEED? -> :MOTOR:SSPEED I1
:MOTor:SYNChronize
Function Sets the synchronization source used to
compute the rotating speed and torque or
queries the current setting.
Syntax :MOTor:SYNChronize {U<x>|I<x>|
EXTernal|NONE}
:MOTor:SYNChronize?
<x> = 1 to 4 (element)
EXTernal = External clock input (Ext Clk)
NONE = No synchronization source
Example :MOTOR:SYNCHRONIZE NONE
:MOTOR:SYNCHRONIZE? ->
:MOTOR:SYNCHRONIZE NONE
:MOTor:TORQue?
Function Queries all settings related to the torque.
Syntax :MOTor:TORQue?
Example :MOTOR:TORQUE? -> :MOTOR:TORQUE:
TYPE ANALOG;RANGE 20.0E+00;AUTO 0;
SCALING 1.0000;UNIT "Nm"
IM 760301-17E