Table of Contents
Advertisement
Explanation
IM 760301-17E
Enter the following settings when using a controller to set information that can be
specified through key operation on the WT3000 or when outputting setup parameters or
output waveform data to the controller.
Baud Rate
Select the baud rate from the following:
1200, 2400, 4800, 9600, 19200, or 38400
Data Format
Select the combination of data length, parity, and stop bit from the following:
8-NO-1, 7-EVEN-1, 7-ODD-1, or 7-NO-2
Handshaking Method
Select the transmit data control and receive data control from the following:
NO-NO, XON-XON, XON-RTS, or CTS-RTS
Terminator
Select the terminator from below. On the WT3000 menu, select the terminator that is
used when transmitting data from the WT3000. Use "Lf" or "Cr+Lf" for the terminator for
receiving data on the WT3000.
Cr, Lf, or Cr+Lf
2.6 Setting the RS-232 Control
1
2
3
4
5
6
7
App
Index
2-9
Advertisement
Table of Contents
