Ip Igmp Snooping; Ip Igmp Snooping Priority - Edge-Core ES3510MA-DC Management Manual

This command enables IGMP snooping globally on the switch or on a

ip igmp snooping

selected VLAN interface. Use the no form to disable it.
S
D
Enabled
C
Global Configuration
C
◆
◆
E
The following example enables IGMP snooping globally.
This command assigns a priority to all multicast traffic. Use the no form to
ip igmp snooping
restore the default setting.
priority
S
D
2
C
Global Configuration
C
This command can be used to set a high priority for low-latency multicast
traffic such as a video-conference, or to set a low priority for normal
multicast traffic not sensitive to latency.
YNTAX
[no] ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
When IGMP snooping is enabled globally, the per VLAN interface
settings for IGMP snooping take precedence.
When IGMP snooping is disabled globally, snooping can still be
configured per VLAN interface, but the interface settings will not take
effect until snooping is re-enabled globally.
XAMPLE
Console(config)#ip igmp snooping
Console(config)#
YNTAX
ip igmp snooping priority priority
no ip igmp snooping priority
priority - The CoS priority assigned to all multicast traffic.
(Range: 0-6, where 6 is the highest priority)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
– 897 –
| Multicast Filtering Commands
C 38
HAPTER
IGMP Snooping