Roth EnergyLogic Touchline/wireless User Manual page 90

User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
Parameter
P-46
P-47
90
Description
Activate or deactivate "setpoint sharing within one zone".
 Refer to also page 121, chapter 16.
Setpoint sharing is typically used for large rooms that have different temperature
profiles for different parts of the room. The room is divided into several heating
zones each with its own wireless room thermostat. Each heating zone will control
the part of the room according to its own control loop. However, all setpoints are the
same. A change of the setpoint at one wireless room thermostat initiates a change
of all relevant wireless room thermostats. All relevant room thermostats need to be
within one zone of the wireless connection module and enabled for setpoint sharing
by the settings of parameter P-46.
●
Factory settings: Option "0"
●
Options:
–
0: deactivate
–
1: activate
Operation
►
Press sensor button
►
Press sensor button
►
Select one of the following options:
–
Press sensor button
next parameter P-47.
–
Press sensor button
lected parameter.
Activate or deactivate lock for public spaces or hotels.
●
Factory settings: Option "0"
●
Options:
–
0: deactivate lock.
–
1: activate lock for public spaces.
All sensor buttons are locked. When pressing sensor button
code for public spaces is prompted.  See parameter description P-36,
page 86.
–
2: activate lock for hotels.
All sensor buttons except for sensor buttons
sor buttons and
When pressing sensor button
prompted.  See parameter description P-36, page 86.
Operation
►
Press sensor button
►
Press sensor button
►
Select one of the following options:
–
Press sensor button
next parameter P-48.
–
Press sensor button
lected parameter.
. The display shows 0.
or , to select option 0 or 1.
, to save the changed settings. The display shows the
, to interrupt the procedure. The display shows the se-
it is possible to change the room temperature setpoint.
the access code for public spaces is
. The display shows 0.
or , to select option 0, 1 or 2.
, to save the changed settings. The display shows the
, to interrupt the procedure. The display shows the se-
the access
and are locked. With sen-
P100011294 E